Teck Leong Industries Pte Ltd

 

TEL: (65) 6790 9777
FAX: (65) 6790 9555

Benjamin Kuah
B.Acc(Hons)
benjamin@copper.asia

Jasmine Kuah
B.Acc
jasmine@copper.asia

Kuah Beng Hui
CA (Singapore)
benghui@copper.asia

Alicia Kuah
B.Acc (Hons)
alicia@copper.asia

Adrian Ngoo
M.Eng.Sc(Mech)
B.Mech.Eng (Hons 1)
adrian@copper.asia

Joe Lim
joe@copper.asia

 

Locate Us

EDM Graphite - Grade G3

Send Enquiry   

Electrical Discharge Machining Graphite Grade G3
 
G3 is a fine grain isotropic EDM Graphite which is suitable for EDMing of plastic moulds. G3 is usually employed in the roughing EDM process. It can also be employed in the finishing EDM process in certain applications involving large cavity electrodes.

  APPLICATIONS 1/4
  • Forging dies
  • Diecast moulds
  • Plastic moulds
  • High metal removal rates
  • Low wear roughing to mid-range EDM electrodes

 

DM Graphite Grades are designed to span the range of application conditions from high metal removal rates to fine detail finishing.

TYPICAL PROPERTIES @ ROOM TEMPERATURE
  • Density - 1.77g / cm3
  • Porosity (Open) - 13%
  • Grain Size - 10 µm
  • Pore Size - 1.5 µm
  • Permeability (air at 20°C) - 10 x 10-2cm2 / sec
  • Hardness Rockwell B - 70 (HR 5 / 100)
  • Bending strength - 50 N / mm2
  • Young´s modulus - 10.5 kN / mm2
  • Electrical resistance - 14 µΩm
  • Thermal conductivity - 80 Wm-1 k-1
  • Thermal expansion (20-200°C) - 3.9 x 10-6 / K
  • Ash value - max 0.2%
     

FABRICATION SERVICES
We provide fabrication services to your specifications.

 

 


 

 

 
 

Disclaimer: Specifications and descriptions of the articles may change without notice. Teck Leong Industries Pte Ltd, Ban Soon Cheong Pte Ltd, Radiation Control (Asia Pacific) Pte Ltd, Eurometalli (Far East) Pte Ltd and Advance Storage Pte Ltd (known as “Our Group of Companies”) whether jointly or severally is/are not responsible for the accuracy, completeness or usefulness of information contained herein and shall not be liable for any damage, loss, injury or inconvenience arising from or in connection with the contents of this publication. All information presented in this publication is only strictly for reference purposes. Each and every member of Our Group of Companies disclaims all liability for the information presented nor is such information a warranty or representation by Our Group of Companies or any member thereof.

Login
ID
Password